FireTracker Conventional Control & Indicating Equipment FT420

When safety is paramount, it is important to choose a market leader in fire equipment and solutions.

FireTracker Conventional Panels are ideal for all commercial, industrial and residential applications.

Overview

The Brooks FireTracker Conventional CIE, FT420, is a highly integrated, highly configurable and flexible Fire Alarm Control Panel. It has been designed and manufactured to comply with AS7240.2 and AS7240.4 standards. It has been tested and approved under the CSIRO ActivFire scheme. The product with correct configuration and installation is suited to a wide range of applications which require reliable detection, occupant warnings and ancillary control.

  • Simple and clear user interface – the CIE modular and intuitive user interface significantly simplifies the system operations. It provides users with all the necessary information and controls at a glance via the individually well-grouped indicators and momentary push-button switches.
  • Audible and visual indications – it is capable of providing visual and audible warning for fire alarm evacuation conditions using external strobe output and warning output. If an OWS option is added, the FT420 system provides additional fire safety by using both alert and evacuation tones and messages.
  • Less disturbance during tests – if OWS is used, the CIE broadcasts clear and brief voice messages to the specified speakers during the alarm tests and walk test “Testing”. It ensures the efficiency of the system routine tests and minimises unwanted disturbances to occupants.
  • Gaseous extinguishing system – the FT420 can incorporate a Brooks dual stage gaseous extinguishing system that meets the relevant clauses of the Australian Standard AS4214.
  • Brooks AlertCom – custom programming converts the FT420 CIE into a fully functional Occupant Management System enabling the tailoring of 8 unique tones to prompt a specific response.   All tones can be activated manually and via automatic triggering.

Features

The Brooks FireTracker FT420 consists of the following components:

  • Configurable for 4 to 20 Conventional Zones
  • Individual Zone Controls & Status Indication
  • Supervised Alarm Devices output and Disable facility
  • Supervised Ancillary Control Facility (ACF), independent control and indication
  • Supervised External Strobe output and Disable facility
  • Walk Test facility
  • Occupant Warning System
  • Multiple programmable supervised speaker circuits (optional)
  • Multiple programmable supervised 24V outputs (optional)
  • Multiple programmable clean contact outputs (optional)
  • AlertCom i.e. multiple tones / messages manual and automatic triggering
  • Gaseous dual stage extinguishing system control module (optional)

6218 - Drip Pan for Detectors
Data Sheet
6296 - Brooks Conventional Enclosed Heat Detector 72°
Data Sheet
6297 - Brooks Conventional Enclosed Heat Detector 87°
Data Sheet
6298 - Brooks Conventional Enclosed Heat Detector 117°
Data Sheet
6360 - Brooks Protective Cover for Detector
Data Sheet
6377 - Brooks Duct Probe Chamber
Data Sheet
2324 - Brooks Conventional Detector Base
Data Sheet
BVADC - Brooks Visual Alarm Device Ceiling Mount
Data Sheet
4318 - Brooks Conventional Combination Heat Detector
Data Sheet
BVADW - Brooks Visual Alarm Device Wall Mount
Data Sheet
4375 - Brooks Conventional Heat Detector 60°
Data Sheet
4376 - Brooks Conventional Heat Detector 80°
Data Sheet
4452 - Brooks Conventional Photoelectric (Optical) Smoke Detector
Data Sheet

Related Systems

FireTracker 2-Zone Conventional Control Panel FT2FP

The Brooks FireTracker FT2FP 2 Zone Conventional was designed for smaller applications where the system is not required to be Fire Brigade connected or meet the conditions of AS1670.1.  The FT2FP CIE, provides panel functions required by AS7240.2 & AS7240.4.

Features

The Brooks FireTracker Local Control Panel FT2FP consists of the following components:

  • 2 x Fully Supervised Zone Input Circuits
  • Individual Zone Controls & Status Indication
  • Fully supervised 24V output for alarm devices rated @1A maximum and Disable Facility
  • Common Alarm dry-contact relay output rated @ 2A maximum. 
  • Common Fault (Defect) dry-contact relay output rated @ 2A maximum. 
  • Common Isolate dry-contact relay output rated @ 2A maximum. 
  • Two user configurable programming dry-contact relay outputs rated @ 2A maximum. 
  • Provision for connection of an optional Panasonic web server to provide Ethernet connectivity with web pages and email alerts. 

Related Information:

6218 - Drip Pan for Detectors
Data Sheet
6296 - Brooks Conventional Enclosed Heat Detector 72°
Data Sheet
6297 - Brooks Conventional Enclosed Heat Detector 87°
Data Sheet
6298 - Brooks Conventional Enclosed Heat Detector 117°
Data Sheet
6360 - Brooks Protective Cover for Detector
Data Sheet
6377 - Brooks Duct Probe Chamber
Data Sheet
2324 - Brooks Conventional Detector Base
Data Sheet
BVADC - Brooks Visual Alarm Device Ceiling Mount
Data Sheet
4318 - Brooks Conventional Combination Heat Detector
Data Sheet
BVADW - Brooks Visual Alarm Device Wall Mount
Data Sheet
4375 - Brooks Conventional Heat Detector 60°
Data Sheet
4376 - Brooks Conventional Heat Detector 80°
Data Sheet
4452 - Brooks Conventional Photoelectric (Optical) Smoke Detector
Data Sheet

FireTracker Single Zone Conventional Control Panel FT1-SB 

The Brooks FireTracker FT1-SB is single zone conventional fire alarm panel which when used with compatible smoke and/or heat detectors and auxiliary devices, provides a complete single zone automatic fire detection and alarm system.

FT1-SB has been designed to comply with the Australian standard AS7240.2 and for specific use in non-critical switchboard applications such as main switchboards and motor control panels. Applications where fire detection is required within the switchboard cabinet itself rather than protecting the room within which the switchboard is located. 
The design of the system allows for the utilization of the same techniques as originally used in the switchboard design itself, i.e. standard meter case format and DIN rail mounting.

Features

The Brooks FireTracker FT1-SB consists of the following components:

  • Display module which includes all controls and indicating displays in an enclosure that can be front panel mounted in a standard 92mm x 92mm square cut out in any switchboard door cabinet. This provides full control of the system without needing to enter the panel to operate, manage, bypass or test the system.
  • Control and termination module which is interfaced to the display module via RS485 (4 wire) is mounted on standard DIN rail enclosure.
  • Switch mode power supply is rated at 24-volt DC @ 1 Amp and is also DIN rail mounted.
  • Intuitive indication and controls, high intensity LED indicators and pushbutton switches.
  • Transparent protective cover for the display module.
  • Fully supervised detector circuit.
  • One supervised alarm output limited to 0.5 Amp.
  • Two alarm changeover relay contacts rated to 240VAC @ 5Amp and 24VDC @ 0.5Amp.
  • Two fault changeover relay contacts.
  • One disable (isolate) changeover relay contact.
  • Universal AC input DIN rail switch mode power supply 240VAC / 24VDC @ 1Amp.

Related Information:

2324 - Brooks Conventional Detector Base
Data Sheet
4452 - Brooks Conventional Photoelectric (Optical) Smoke Detector
Data Sheet

Contact Brooks to find the right solution for you.

Brooks are specialists in system design and commissioning and are able to assist you in finding the right solution for your needs. Our panels can be customised to suit any project.

Call us on 1300 78 3473 (Fire) or .